This comprehensive guide is designed to assist you in efficiently and precisely conducting testing for the Feedback module on the PSI Android Fork application. It focuses specifically on critical aspects of the application. If you require guidance for conducting an overall Android test, a dedicated testing guide has been created. It covers the testing procedures for configuring data elements, programs, and the items that need to be tested. To access the testing guide, please click here.

Table of contents:

Testing concepts

In the testing field, some concepts and standards are necessary to conduct comprehensive testing. At a minimum, this includes:

• Test case: a test case is a detailed set of conditions developed to verify the functionality of a specific feature.

• Pre-conditions: specific criteria that must be met to execute the test case.

• Test environment: The test environment contains all items to test.

What servers and users to use

General behavior

Verify that the programs are loaded correctly

Pre-conditions:

Steps:

1. Once you are logged into the PSI Android Fork, the data will be synchronized. Note that this process may take a few minutes.

Open

Open

2. Verify that all programs have been loaded correctly.

Expected result:

The application should display all programs assigned to the user for both HNQIS2 and RDQA.

HNQIS2

Start an assessment

The initial test in HNQIS2 is to verify whether the application allows the creation of a new assessment.

Pre-conditions:

Steps:

1. Select a program from the list.

2. Tap on the Search button

Expected result:

The application should allow you to start an assessment, and all items should load correctly; in the enrollment data section, the fields should autofill with the information entered.

Verify the child sections in the assessment

Sections can be configured to have child sections based on answers.

Pre-conditions:

Steps:

1. Select the option that has been configured to show the new sections in the assessment.

Expected results:

The child sections should be shown when the configured option is selected; otherwise, the section should be hidden.

Verify the conditional logic questions.

Some sections of the assessment contain questions with conditional logic. Conditional logic means that based on the response to specific questions, additional questions may be added.

Pre-conditions:

Steps:

1. Enrollment in the assessment that contains the program rule.

2. Check that the conditional logic questions are displayed.

Expected results:

The conditional logic questions should be shown when the configured option is selected; otherwise, the questions should be hidden.

Feedback module

This is one of the most important features of the PSI Android Fork. The feedback module allows you to review the answers to the questions performed in the assessment.

Pre-conditions:

Steps:

1. Select or create an assessment.

2. In the dashboard, tap on the three dots menu in the top right corner.

6. Tap on the share button, the application should allow sharing the feedback through different social media.

Expected results:

The questions should be filtered by the tabs mentioned above correctly, in addition the application should allow sharing the information, and also the application should show only failed questions when you check this function.

RDQA

Enrollment in the RDQA program

Pre-conditions:

Steps:

1. Open RDQA program

2. Click on the search button and select a health area, all available sanitary areas must be shown.

3. Tap on the “magnifying glass” icon

4. Click on the Create new button

5. Select an organization unit and click on the Accept button

6. Select a date

7. Click on the Accept button

8. Check the enrollment data fields are autofilled.

9. Check the following fields are mandatory:

• RDQA - Health Area

• RDQA - Reporting Period Start

• RDQA - Reporting Period End

• Do you want to do an M&E assessment?

Expected results:

The application must allow enrollment in the RDQA program correctly, and the fields in the enrollment data section are autofilled correctly.

Action plan-Header title

Pre-conditions:

Steps:

1. Add a new action plan

2. Select an event date and an organization unit

3. Tap on the next button

4. Type an action item

5. Verify the header title

Expected results:

The action item entered should appear in the header title of the action plan.

Data verification-Header title

Pre-conditions:

Steps:

1. Add a new Data verification

2. Select an event date and an organization unit

3. Tap on the next button

4. Select an indicator

5. Verify the header title

Expected results:

The indicator selected should appear in the header title of the Data verification.

Feedback module

This is one of the most important features of the Android Fork, this module allows you to review the answers to the questions performed in the assessment.

Pre-conditions:

Steps:

1. Tap on the settings menu (three dots) in the top right corner.

2. Select Feedback

3. Verify the feedback module displays two sections: By indicator and By technical area

4. Select By indicator tab.

5. Check that the added indicators are displayed and that each indicator has seven dimensions.

6. Verify that each dimension displays a text when the arrow is clicked.

7. Select By technical area tab.

8. Check that within each dimension the aggregated indicators are shown.

9. Verify that each dimension displays a text when the arrow is clicked.

10. Check show only failed, each section should only show the questions that were failed.

11. Tap on the share button, the application should allow sharing the feedback through different social media.

Expected results:

The questions should be filtered by the tabs mentioned above correctly, in addition the application should allow sharing the information and also the application should show only failed questions when you check this function.

Charts and indicators

The application has a section dedicated to charts and indicators corresponding to the RDQA program.

Steps:

1. Check that the indicators are correctly displayed.

2. Check that the charts are displayed correctly.

3. Tap on the three dots in the upper right corner of the chart.

4. Change the view of the chart.

Expected results:

The indicators are displayed correctly, and the charts allow changing the type of display.