...

It is important to note that the configurations that will be shown here are of a basic nature. To test the feedback module, a specific guide has been created for this purpose. To access the specific guide, click here.

An effective test matrix has been thoroughly designed to capture the overall results of all tests. This matrix covers the essential attributes and elements that need be tested, along with their corresponding expected results. In addition, it provides a space to enter the actual test results and conveniently mark them as pass or fail.

...

Table of contents:

...

1. Create a program rule, to create program rule proceed as follows: Maintenance/Program/Program rule

2. Click on the plus button.

3. Enter program rule expression.

...

4. Define program rule action

...

5. Log in to the Android Fork and verify the program rule.

...

Expected results: This program rule enables you to hide or show a designated question or section based on a condition of your choice. Once the specified condition is met, the question or section will be promptly and accurately displayed.

...

Option set

Pre-conditions:

1. Create a option set, to create a option set proceed as follows: Maintenance/Other/Option set

2. Click on the plus button.

3. Enter the name and options.

...

4. Log in to the Android Fork and verify the option set.

...

Expected results: When you click on the question that has been assigned an option set, the corresponding options should be displayed.

...

Legends

Pre-conditions:

1. Create a legend, to create a legend proceed as follows: Maintenance/Other/Legend

2. Click on the plus button.

3. Enter the name, values and color.

...

4. Log in to the Android Fork and verify the legend.

...

Expected results: The legend should dynamically appear based on the selected option in the question. It should be displayed next to the question, showcasing both the selected text and its corresponding color.

...

Saving data without internet connectivity

Pre-conditions:

1. Select a program.

2. Fill in the fields.

3. Save the program.

...

4. The application should display a “Cycle” icon in the data set saved.

...

Expected results: The form should be saved on the device, but the device is not connected to the Internet, so the data is not sent to DHIS2, therefore the application should display a gray "cycle" icon.

...

Send the data stored to DHIS2

Pre-conditions:

1. Tap on the "Cycle" icon in the upper right corner.

2. Tap on the Send button.

...

Expected results: A message should appear indicating that all data have been sent to DHIS2.

...

Verify the data sent to DHIS2

Pre-conditions:

1. Log in to the server where the data was sent to.

2. Open Tracker capture to tracker program and capture to event program.

3. Look for data sent from the application and compare the data.

...

Expected results: The data displayed on the server must match the data displayed in the application.

...

Testing data sets

Data entry in DHIS2 is effectively organized using data sets. A data set serves as a collection of data elements grouped together for streamlined data collection. In distributed installations, data sets also define portions of data for seamless export and import between different instances of DHIS2. For example, data can be transferred from a local installation at a district office to a national server. Data sets are not directly linked to the data values themselves, but rather through their associated data elements and frequencies. As a result, modifications, deletions, or additions to a data set can be made at any time without impacting the raw data already captured in the system. However, it is important to note that such changes will naturally affect the process of collecting new data.

...

Expected results: The form should be saved on the device, but the device is not connected to the Internet, so the dataset is not sent to DHIS2, therefore the application should display a gray "cycle" icon.

...

Send the data stored to DHIS2

...

Expected results: A message should appear indicating that all data have been sent to DHIS2.

...

Verify the data sent to DHIS2

...

Expected results: The data displayed on the server must match the data displayed in the application.

...

Testing Analytics

Analytics

...

Pre-conditions:

1	The application must have completed assessments
2	Select the analytics section located at the bottom of the home page

Steps:

1. Check the charts.

2. Check that it is possible to move from one tab to another.

...

1. Tap on the three dots in the upper right corner of the chart.

2. Change the view type of the charts

View as bar	View as line	View as value	View as table
Image Added	Image Added	Image Added	Image Added

Expected results:

The application should allow switching to another tab, and the charts should update correctly, as well as the view types should be available.