| Info |
|---|
The content of this page describes the steps that must be followed to transfer all historical data from a H1 Program into its new H2 version. To proceed with this guide ensure that you’ve already converted a H1 Program to H2 using the Metadata Conversion guide. |
Please Note:
The steps described in this guide can be followed before or after the Data Capture enabling process, you’re not required to transfer old Assessments Data to Set Up the H2 Program logic.
...
This feature can only be found in the homepage (Programs List page) of the PCA. You can access it by clicking the three-dot menu at the far-right of any HNQIS 1.X Program displayed on the list (see Image 1).
...
| Info |
|---|
The Data Transfer is performed from the original H1 Program, the H2 version of the Program won’t display a Data Transfer option. |
Please Note:
This option is only available for Programs labeled as HNQIS 1.X, every other Program’s three-dot menu will display different options from the ones displayed in Image 1.
Also, the Transfer Assessment Data to HNQIS 2.0 option will be disabled if the selected program hasn’t been converted to H2 yet.
| Info |
|---|
The Data Transfer is performed from the original H1 Program, the H2 version of the Program won’t display a Data Transfer option. |
Transferring Data from a H1 Program to its H2 versionTransferring Data from a H1 Program to its H2 version
| Note |
|---|
Warning: This is a delicate process, to avoid any issues, please make sure that your internet connection is stable and that your device is powerful enough to handle the process. |
Hardware Requirements
The transfer process requires some heavy calculations for each Assessment that is transferred to the new H2 Program, this means that there are some Hardware Requirements that your device must meet in order to proceed.
The usage of a recent device is recommended in order to guarantee that enough CPU and RAM performance is provided.
| Info |
|---|
Technical Note: While testing this feature, a device with the following specifications was used:
The total usage of the CPU was about 35% and the total usage of RAM was about 1 GB. |
The Transfer Process
After clicking the Transfer Assessment Data to HNQIS 2.0 option from any H1 Program that has already been converted to H2, a new window will appear displaying a transfer summary (see Image 2).
...