Page Comparison

HNQIS Health Areas *

The list of Health Areas available. Health Areas are used to group HNQIS checklist into categories.

HNQIS Competency *

The three Competency Classes used in most HNQIS checklists. The available options are: Competent, Competent but needs improvement and Not Competent.

HNQIS - Yes1No0

Basic Option Set used for questions during an assessment where Yes is the correct answer and No is the incorrect one. The available options are: Yes and No.

HNQIS - Yes0No1

Basic Option Set used for questions during an assesmentassessment, it is the opposite of the HNQIS - Yes1No0 Option Set. The available options are: Yes and No.

HNQIS - Yes1Partial0.5No0

Basic Option Set used for questions during an assesmentassessment, almost the same as the HNQIS - Yes1No0 Option Set but adding an intermediate answer. The available options are: Yes, Partial and No.

HNQIS - RealSimulated

Basic Option Set used for questions during an assesmentassessment. The available options are: Real and Simulated.

HNQIS - Health Area *

Attribute used to store the Health Area corresponding to a particular HNQIS Program. The value is automatically set by the Attributes - Assign Health Area Program Rule of each HNQIS 2.0 Program.

HNQIS - Global Score *

Attribute used to store the Assessment Score corresponding to a particular HNQIS Program. The value is automatically set by the Attributes - Assign Global Score Program Rule of each HNQIS 2.0 Program.

HNQIS - Organisation Unit *

Attribute used to store the code corresponding to the selected Organisation Unit for the HNQIS Assessment. The value is automatically set by the Attributes - Assign OU Program Rule of each HNQIS 2.0 Program. This requires a Organisation Unit to have a Code configured in DHIS2, otherwise the attribute will be left empty.

HNQIS - Assessment Date *

Attribute used to store the Enrollment Enrolment Date (which represents the Assessment Date) of the HNQIS Assessment. The value is automatically set by the Attributes - Assign Enrollment Enrolment Date Program Rule of each HNQIS 2.0 Program.

HNQIS - Competency Class *

Attribute used to store the Competency Class of the HNQIS Assessment depending on the Competency Classification conditions based on the Critical and Non-Critical Scores. The value is automatically set by the Attributes - Assign Competency Program Rule of each HNQIS 2.0 Program. If the program is configured not to use Competency Class, this attribute is removed.

HNQIS - YesNo *

Basic Legend Set that links the values between 0.5 and 10 (correct answer) with the color colour green and the values lower than 0.5 (incorrect answer) with the color colour red.

HNQIS - YesPartialNo

Variation of the HNQIS - YesNo Legend Set that links the values between 0.6 and 10 (correct answer) with the color colour green, values between 0.4 and 0.6 (partially incorrect answer) with the color colour orange and the values lower than 0.4 (incorrect answer) with the color colour red.